Bosch KE-Jet System Pressure
On the Bosch KE-jet systems you will connect one leg of the “T” to the fitting on the fuel distributor that... Continue reading →
Rebuilding Bosch Fuel Distributors & Warm-Up Regulators
On the Bosch KE-jet systems you will connect one leg of the “T” to the fitting on the fuel distributor that... Continue reading →
On the Bosch K-jet systems this pressure can be measured at the top of the fuel distributor by connecting a continuous injection... Continue reading →
It is very important to have the air flow meter set up properly. If it is out of adjustment you... Continue reading →
To check the fuel distributor for leak down you can run the fuel pump, then turn off the pump and... Continue reading →